Hi all, been awhile since I posted last been busy with other stuff. Nonetheless I mentioned last year about using this boolet in my inline ML. Got a chance to test it this morning and I'm satisfied with results. I used 60 gr of BH209, my intention was to keep velocities at 1400 fps or less and my three shot string was 1360, 1318 and 1340. with 1 1/4" group at 50 yds. Since this is a pistol boolet with that wide flat nose accuracy suffers at higher velocities like I found out last year. Boolets were sized to .452 and I used Harvester black CR sabots dry patch between shots, these give a good tight seal with good resistance when loading. Gun is the Traditions Vortek ultralight with the accelerator breech plug. Hope I get a chance for a fur test in a couple weeks.. Merry Christmas all!