How do the 30cal bullets look?
How do the 30cal bullets look?
Well I shot 150 rounds, I got the 135 grain bullets supersonic and pushed them a little harder than normal to cause leading if it was going to happen, well I shot ar9, cz shadow 2, s&w single stack. Had 75 hitek and pc. only had 2 colored silver streaks in the s&w and it has always had a picky chamber. So I am happy and will just run strait range scrap and pull the load down a little. Thanks everyone
sorry about the delay, just got busy over the holidays then wrecked my dirt bike. Lucky I am just soar. But the powder coat worked better, slight better accuracy and no leading. seamed like the pc was more durable. I think this is a solid win for powder coating.
My (limited) experience with Hi-tek has shown me two things. You have to be careful loading it to not scrape it off with the case mouth and your bore needs to be squeaky clean and smooth. Fouled, leaded or pitted barrels will not shoot Hi-tek accurately more than a few shots. The alloy doesn't matter.
Hi Tek is more sensitive to contaminated lead than PC. "Range scrap" can be anything. Alloy does matter.
I have had alloy that had to be soaked in muriatic acid overnight , only then the coating bonded properly. You could not see any problem except leading. Bullets were soaked,acid turned black. My contaminant was Niobium, got the alloy analyzed.
And the alloy matters in hardness,too. Compared to Hi Tek, I can shoot softer lead when PC:d, everything else being equal.
But the ease of batch coating and the uniformity... Hi Tek is fantastic. It just won't fix too soft lead.
To the OP: You let the bullets harden four days after coating? I let mine wait for two weeks to harden up before I load. Not to mention shoot.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |