I'd like to try some wadcutters in my Puma 92/.45 Colt. Any suggestions for a mold?, do you think I could get them to feed ok?
I'd like to try some wadcutters in my Puma 92/.45 Colt. Any suggestions for a mold?, do you think I could get them to feed ok?
You may have problems with feeding, they may hang up on the chamber mouth, some Puma's don't like SWC much less WC.
I would suggest seeing if a member here would donate some to find out. I don't have a 45WC mold so can't help.
Calamity Jake
NRA Life Member
SASS 15704
Shoot straight, keepem in the ten ring.
You could load some dummy rounds with the boolits backwards to check the feeding question.
Happiness is a couple of 38's and a bucket of ammo.
I remember not too long ago Mike V had a article on his possible "all around molds" and the one he selected for .45 looked like it was in the SWC class. A full WC I'm unsure if it would work. My winchester 94 has to have them seated at a specific length in order for them to cycle but its not worth the trouble (.44mag) the Keith SWC works just as well. I have a 452389 that is kinda like a wad cutter with half a round ball stuck on top. Dunno if it would work for what your trying to do but its a good boolit.
My firearms project blog
Corvette8n
SlugHammer has the right idea. Turn over what ever you have and see if it works. I've got an LSI Puma in Stainless that's a 45Colt. The wc wouldn't work for me. There are a lot of great moulds out there that cast a big meplat. You might want to look into Veral Smith's LBT WFN. These slugs hit pretty hard and dig pretty deep. If you're just looking for a light load any flat point will do. Keep writin', I'm learnin'. Helice
I have a couple 92s in .45, one Rossi and one Winchester, neither will feed Keith bullets unless they are seated over the front driving band and even then they dont feed so well. However the LEE 300gr GCFP works great in both as well as their 250gr FP. I think that in the 92s it is just as much an overall length issue as it is a SWC/WC feeding issue.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |