Harbor freight grinder stand! This is what I take to the range for load development
Harbor freight grinder stand! This is what I take to the range for load development
I started reloading on a shelf in a linen closet.
Built a king size bench after buying a house.
Ended up using the Lee Loader on the kitchen counter, because there's no woman to yell at me.
Life is good.
"Everyone has a plan, until they get punched in the face!" - Mike Tyson
"Don't let my fears become yours." - Me, talking to my children
That look on your face, when you shift into 6th gear, but it's not there.
Lee Has their Press stand for about $100 out the door on their site.
These men and their hypnotized followers call this a new order. It is not new. It is not order.
I bought a Black & Decker Workmate 425 off craigslist for $30. Had some scrap 3/4" plywood that I doubled up to bolt or clamp the presses to. Added a cleat to the bottom so the workmate top would clamp it in place. I can setup wherever I need and when it's not used for casting/reloading it good for other tasks and folds up easy for storage and transport to job sites especially when I need an extra hand or out feed table. It's a bit heavy but you don't have to worry about tipping over. Any parts you need are readily available.
yep...
Mine with a riser/drill press...
Less than 1/2 the cost of the Lee stand, has 4 legs instead of 3.
https://www.harborfreight.com/univer...and-59196.html
.
Last edited by Kenstone; 09-07-2023 at 12:58 PM.
Size/Prime a few cases when starting off with a progressive and put them aside. You can plug them back into the process when a bad/odd case screws up in the priming station and continue loading.
Years age I got a tool stand for bench grinders
Regards,
Gary
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |