Everything else printed pretty amazing in PetG,
well until I tried printing the Bullet Feed Dies...
Heres samples, ALL are different settings (starting from the recommended from UserManual.pdf) and different brands of PetG manufacturers (StrongHold, eSun, 3D-Fils, R3D, AzureFilm, asf all transparent red are StrongHold's PetG since that is the one that printed flawlessly until right now.) oh, and there are a lot more where these came from but they all look the same.
I tried rolling back the softwares and firmwares to 3 other versions that also worked previously, no differences so I am updating the whole she-bang after I finished reloading .38's for tomorrows cup match in PPC... *sigh so much I wanna do, so little time... of course doesn't help I'm a lazy fatarse either...*
The 9mm feeder die prints good if the spaghetti monster does not devour it, the trouble is with the 45acp bullet feeder die of whom all failed prints are.
Any thoughts from you gurus and masters of the mind that I greatly look up to would be utmost appreciated!
Do you all print the dies with PLA?
I have ordered one of those suspicious looking PLA+ rolls while waiting your feedback on this one... hmm just strikes me that I might have one or two small samples of PLA with the printer... like 2 x times 0,10kg or something'ish like that?!?
(Orange and hmm I have some vague memory pictures of Orange and one more color... also got another sample with something saying xxxx-cf after but the roll was smashed by the postal "service's" and the wrapper looked like a porcupine gangbang rubber, our swedish post officials can sure wreckabagged goods... As my understanding is "cf" is highly hygroscopic and wont print due to water damage if wrapper cracked in the open so I cant use it after postofficials went postal on the delivery right?)
Anyhows I followed all recommendations and I tried different extrusions ranging from 0,20 0,16, 0,12 0,08 and different infills/walls/speeds but they all come out with that same failure...
I'm really curious how you managed to make yours mint print mates?!?
Oh and yes, should take the opportunity to ask while on the Bullet Feeding Dies. What is the .stl called for the "nut" to the BulletFeederDie's? (It does not show up in the directories put together using the wonderful .jar)
Have a wonderful weekend mates and may the force be with you,
/Silverbullit epic level nooob