I now have a 9x18 Makarov and dies. Brass is coming later this summer or fall. Does anyone make a .365 inch sizing die?
I now have a 9x18 Makarov and dies. Brass is coming later this summer or fall. Does anyone make a .365 inch sizing die?
Greetings,
Lee markets a 0.365" die.
https://www.leeprecision.com/bullet-szr-punch-365
It is the new design and I believe you need a holder for it.
Cheers,
Dave
Thanks. The holder I have. I could go the tumble lube route.
However, doesn’t anyone make a .365 sizer to fit a Lyman Lube Sizer?
A check of their website shows this item to be in stock. Thanks!
I just recently started casting for my Makarov and the mold kicks out a .365,366 nugget which I planned on powder coating. I Had a Lyman .359 which I reamed and polished out to .363 which I used to size them down, then I powder coated them, they then measured .365+. I then ordered a push thru sizer at .365 and they came out perfect as my bore slugged out at .363.5 .
I have a Lyman .366 diameter die that I don't remember where I got it, but Lyman made them
a long time ago. Don't know if they still make that size or not. It's perfect for the 9x18 Mak.
C.I.P. shows many 9.3 cartridges in both rimmed and rimless rifle category. .366" = 9.295238095238095mm .
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |