it is called DAA PRIMAFILL , just looked it up on the double alpha site.
this does small and large
it is called DAA PRIMAFILL , just looked it up on the double alpha site.
this does small and large
Thanks, here it is https://www.doublealpha.biz/us/primafill
Have ordered the FA one, but need some other stuff from Double Alpha so will add this to my next order from them.
Buy a new tube and see if that solves the issue.
Time is money and the tubes are inexpensive.
Lol, destroyed a handful of tubes before taking Dillon’s advice and priming off the press. Not sure when I’ll try large primers on the press again. Dillon Support Tech kinda irritated me, he was unhappy that I’d not stopped sooner, as of that’s even a reasonable option, and I said that it’s no big deal if I gotta pay for new tubes, then he said “they are covered, unfortunately.” Later in the call he was whining about it again so I told him to just send me two replacement magazine tubes and forget the pickup tubes. I don’t know if he gets a bonus for irritating folks or if the cost of parts comes out of his pocket or if he was just having a bad day, but whatever it was it wasn’t the service I’ve long gotten from Dillon.
Jim, is there anyone in your area that can look at your press? You’ve had more problems with a new machine than I’ve had with 4 Dillons over 32 years. I have to believe that there’s a small problem that’s easily remedied.
As for flaring cases, the adjustment from not enough to too much is very small. The entire range is around one turn from no flare to full flare. Testing has to be done with the screws and bolts at their intended operating level of tightness.
Sometimes life taps you on the shoulder and reminds you it's a one way street. Jim Morris
I don’t think I’ve had a problem with the 650s (I have 3) other than this LPP feeding issue and an earlier ejector wire mangling. I’ve had Lee, RCBS, and Hornady presses and have no plans to change from Dillon. Their service guy just got on my last nerve implying that I was somehow doing something wrong with a primer pickup tube and wishing that he didn’t have to warranty them.
Winchester primers hung up terrible for me until I took a needle file and want around the top side of that orifice. Now they rarely hang up, all other primers flow through like butter now. I had to go that with the large and small orifices.
These things also like fresh batteries, when it stop feeding smoothly, I put new batteries in and it works great. I’ve had mine since 2014 when they were $37 on Amazon. I use it for all of the ammo I load on my 650
8500' Wet Mountain Valley, Colorado
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |