I decided I would try to fix my RCBS Pro Melt by building and installing a PID device. Following reading the PID threads here, and watching some on-line videos, I've assembled my first take at a shopping list. Perhaps viewers can let me know if changes should be made.
I will be taking pictures of the build process. If I'm successful at reanimating the pot, I plan to post some pictures of assembling the wiring and components, and any notes that might be of interest.
Thank you, Richard
- Digital PID
Inkbird AC 100 to 220V ITC-100VH Outlet Digital PID Thermostat Temperature Controller 40DA SSR K Thermocouple
$39.99
https://www.amazon.com/dp/B01489AQAW/
- Yeeco + K Type Thermocouple 0~1300
$13.99
https://www.amazon.com/Yeeco-Thermoc...dp/B00XJ0VUBG/
- On/Off switch (may be overkill)
$9.99
Joinfworld Inline Cord Switch 30A 250V/120V AC Heavy Duty ON Off Switch DPST 4 Pin ...
https://www.amazon.com/dp/B0BBZT2DZK/
- Thermal paste
$5.42
https://www.amazon.com/ARCTIC-MX-4-C...dp/B0795DP124/
- Wire (if I can't unearth some)
$16.96
AOTORUA 100FT 16/2 Gauge Red Black Cable Hookup Electrical Wire, 16AWG 2 Conductor 2 Color Flex...
https://www.amazon.com/dp/B088RC984S/
Note: One article advocated 20 gauge wire.
- Spade terminals
Will need to determine the acceptable sizes when the PID and SSR arrive.