Very purty!
--Wag--
Very purty!
--Wag--
"Great genius will always encounter fierce opposition from mediocre minds." --Albert Einstein.
If the nipples aren't peened, and will fire a cap, I wouldn't worry about them too much. Outpost 75 is right; Kroil will eventually get them loose. If you have large hands, the Pachmayr's that fit Ruger Blackhawks will help more than factory grips. 43 grains of 3f, a .457 round ball and Ford Molly EP grease have taken several eastern Ky deer for myself and several friends. Local Bambi's run 120-140 pounds in a good year. As far as you can hit a coffee can, every time, offhand, is your operating range. ROA's are a great brush gun , especially in hilly country. If you can find a shoulder holster, it will make moving around easier.
The only part I've seen fail is the cylinder latch spring. And that took 30 years of 4-5 pistol matches and hunting season yearly, without cleaning other than the barrel and cylinder. Take the gun apart every year or two and clean it carefully. This spring is the same as the one in a three screw Blackhawk.
Ditto and ditto. Bought a stainless one over 25 years ago, played with it for a while, but haven't had it out since before I retired in 2009. Round balls shot well, the Lee conical mold did not. Used nothing but Goex 2F black, never tried any of the substitutes,
I would not think the ROA would be a good deer gun with either bullet. RB too light, the Lee 220 too inconsistent for anything beyond brick-throwing distance.
Cognitive Dissident
Many years back I had one with a brass grip frame, S/N 357. One time at a black powder silhouette shoot I got it out and was playing with it after all the close range targets had been shot at. I ran out of 3F powder and a friend offered me some 2F. I was quite adamant that pistols used 3F but he said if you want to keep shooting try it. There were 4 chickens at 50 yards and I knocked them all down. The turkey was still standing at 175 yards ( no one was shooting at it) and I joked saying watch me hit the turkey. I held a couple feet high and hit it but didn't knock it down ( surprised me more than anyone ells). There was one bear still standing at 200 yards so here I go again, holding about 3 feet hover his head. It went down. My eyesight was much better back then.
If you haven't tried 2F in your old army, give it a try.
By the way, I paid $115 for that pistol 46 years ago.
That was a bargain for sure. I had to get mine out (blued) just to hold it! Enjoy!
Vietnam Veteran (68-69), NRA Life Member
The Lee R.E.A.L bullets have a small diameter base band and each driving band gets larger as you go up. They load easy without a separate loading stand if you stick with soft lead, either plumber's lead or 1 to 40 tin- lead.if you want a better fill out. Very effective hunting load.
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
Bought mine in 1973 I believe. We loaded 40 grains 3f and lead roundball and plants them in 1 inch at 25 yards with regularity. Reminds me I need to get her out.
I have 2 of them, great pistols! You got a great deal on yours. Mine shoot very well with 200 grain semi wad cutters rolled between 2 cross cut files to knurl and expand them to fit the chambers. Minute of Jackrabbit at 70+ yards.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |