Was at a local open-air swap meet in Versailles, MO., came across these ingots. Marked 'Lead Free', Sn/Ag/Cu and a trademark(?) that I cant quite read. Any use for these? Perused the high copper thread, didn't really help. Thanks, gang.
Was at a local open-air swap meet in Versailles, MO., came across these ingots. Marked 'Lead Free', Sn/Ag/Cu and a trademark(?) that I cant quite read. Any use for these? Perused the high copper thread, didn't really help. Thanks, gang.
Lead Forever!
The 2nd amendment was never intended to allow private citizens to 'keep and bear arms.' If it had, there would have been wording such as 'the right of the People to keep and bear arms shall not be infringed. -Ken Konecki, July 27, 1992
John Galt was here.
"Politics is the art of postponing an answer until it is no longer relevant". (From the movie 'Red Tails')
I have 15 lbs of Kester solder, Sn/Ag/Cu that i plan to use as tin for sweetener.
Last edited by BK7saum; 04-01-2023 at 07:48 PM.
Understand the tin and copper; the silver? What does that bring to the party? Seems a waste, unless you're hunting werewolves!
Lead Forever!
The 2nd amendment was never intended to allow private citizens to 'keep and bear arms.' If it had, there would have been wording such as 'the right of the People to keep and bear arms shall not be infringed. -Ken Konecki, July 27, 1992
John Galt was here.
"Politics is the art of postponing an answer until it is no longer relevant". (From the movie 'Red Tails')
It is 95% tin, maybe 2.5% Ag and Cu. Jus4 another source of tin as far as I am concerned.
Make hollow point boolits with that alloy. Press garlic, into hollow…. Lube with bacon fat.
Should work for vampires, zombies and werewolves, and any other nasties…
Just because it’s a bad idea…
…. Doesn’t mean it won’t be a good time !
It’s lead free solder. The silver adds strength, improves wetting and helps prevent “tin whiskers” as the soldered joints age. When adding to lead, use it as pure tin in your calculations.
”We know they are lying, they know they are lying, they know we know they are lying, we know they know we know they are lying, yet they are still lying.” –Aleksandr Isayevich Solzhenitsyn
My Straight Shooters thread:
http://castboolits.gunloads.com/show...raight-shooter
The Pewter Pictures and Hallmarks thread:
http://castboolits.gunloads.com/show...-and-hallmarks
Oregon Trail has these in their bullets and they are pretty hard. Some people like them.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |