I’ll wash my brass using pins and a tumbler. I’ll then set them on a sunny place to dry. The summer Texas sun will anneal them while they dry. Lol
I’ll wash my brass using pins and a tumbler. I’ll then set them on a sunny place to dry. The summer Texas sun will anneal them while they dry. Lol
The sooner I fall behind...the more time I have to catch up with
I just built my own annealer. I use tempilaq on the inside of the case mouth and when it liquifies and turns translucent, then I know it is done.
I use this to see if it will extend the life of my brass. It doesn't take too long with a somewhat automated machine. About 6 seconds for a 30-06 case, so 10 a minute. That's faster than all of my other steps.
My straightshooter posts: https://castboolits.gunloads.com/sho...raight-shooter
https://castboolits.gunloads.com/sho...RAIGHT-SHOOTER
http://castboolits.gunloads.com/show...raight-shooter
Some people have reached out to me directly to put specific brass packages together regarding specific headstamps. Feel free to ask.
This is by far the biggest bang for the buck I have found for annealing cases. It works wonderfully.
https://www.youtube.com/watch?v=jLRgDZeYQ-M
NRA Benefactor +, GOA Life, GONH Life, CRPA Life, SAF Life
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |