My hunting partner gifted my wife a Browning A Bolt in .325 WSM with 1 in 10 twist. I would like to find a boolit mold 200 grain or more with gas check, as the Factory ammo he used was 200 grain. This load would be for moose and bear with a maximum distance of 200 yards. This is the link to that mold. [URL="https://www.midsouthshooterssupply.com/item/000068mmkar/8mm-karabiner-215-grain-double-cavity-reproduction-mold"] Most of the molds I have found are 190 grain or less. This is one mold I found, but not sure about the use of a gas check.
Maybe for under 200 yards a lighter cast boolit may be a better choice, as uses less powder, and less recoil. I found in the Lyman Reloading Manual for 325 WSM a 165 grain gas check boolit #323470. I slugged barrel and it was .323, so i want to cast and size to 324 correct? I have W Weights, soft lead, range lead, lead shot, and pewter. Thanks for your help. Keyman
I could not figure out how to make the web address blue so you could just click on it. Any ideas of how to do it?