I’m trying reloading .38 special wad cutters. I’ve loaded some and tried them at the range with satisfying results. I am using the MP Mold solid wad cutter and, like other MP Molds, the cast bullets are good as they are cast and don’t need sizing. My problem is that the shape of the bullet requires a good flair to start the bullet in the mouth of the .38 brass, but the Lee flair in the second die is not doing it. I’ve worked it. I’ve crushed cases….that’s too much, but setting the die to give an acceptable flair to accept the bullet is a nightmare. Anyone confronted this problem satisfactorily?