Shoot the gun with the bullets you have that are sized the way you have them to see if there is a problem. Don't make a problem unless you have one.
Shoot the gun with the bullets you have that are sized the way you have them to see if there is a problem. Don't make a problem unless you have one.
I'm shooting 50/50 + 1% Sn. I cast at 700°F and air cool. I size within 1-2 hours of casting. Bullets are still plenty soft and size is a couple ten thousandths over sizing die dimension. I size and lube at the same time. After 2 weeks I load them.
Keep your antimony or cut it slightly and size within a couple hours of casting AC bullets. I use a 356 expander in the Dillon and pulled bullets are squeezed down .0002-3 after seating.
CZ75's are notorious for having short throats. Don't ask how I know.
God Bless, Whisler
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |