1st picture looks like a High Standard stabilizer GW
The pusher is an M1 Carbine bolt disassembly tool.
Sent from my SM-A716U using Tapatalk
GW - Thank you! Looked up High Standard stabilizer and the two flat pieces in the second picture are also High Standard.
TbG - Thank you!
Been shooting High Standard's for 50 years and never seen those flat pieces before. Looks like I got educated too. GW
The High Standard parts are for a"Spacegun". The barrel and weights have a groove and the weight has a set screw that held it in place. The barrel had a long groove in which the weight could be located for desired balance. Look at the model 102 or 103. I had a 103 with a 6 3/4" tapered barrel that used those type of weights.
The little round thing with the appearance of being threaded is probably a bolt part for a Springfield M1903 rifle called the striker sleeve--goes on the firing pin.
DG
Last edited by Der Gebirgsjager; 11-30-2022 at 02:32 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |