although I did a lot of tests on a glock, now I'm shooting ipsc with a tanfoglio stock2
This year I've started shooting a lot more than before, so I'm looking for a way to reduce the cost, since I also have some friends who want to take advantage and shoot the boolits that come out of my molds.
Unfortunately, in Argentina, costs have skyrocketed with inflation, and many shooters have started making their own boolits. So the linotype is scarce.
This is the main reason.
I have a linotype for myself, but not to be generous with 3 more friends.
They are on the hunt for linotype too, but usually only get pure lead.
I have an expander made by lathesmith, which doesn't swage my boolits, they generally stay at a diameter of .3565 which I have measured after disassembling them. As I said before, my barrel is 356
With this configuration, I have no problems with feeding or keyholes.
I used to use the LFC before, but have gotten better results using just the seat and crimp set that comes in the dillon die set.
In IPSC I have to have a minimum factor of 124,000, that is, a boolit of 124 at 1,000 fps.
The pc I use is polyester resin, this==>
https://www.sinteplastindustria.com....42e60ebcbaf988
I tried other colors and brands, but this was always the best.