If you are talking about sizing the cores, I use a traditional swage lube. Check this tread for recipes
"formula for home made swaging lube"
https://castboolits.gunloads.com/sho...ing-lube/page2
If you are talking about sizing the cores, I use a traditional swage lube. Check this tread for recipes
"formula for home made swaging lube"
https://castboolits.gunloads.com/sho...ing-lube/page2
A vote for anyone other then the conservative candidates is a vote for the liberal candidates.
Corbin swage lube.
Ok so I have read stuff that said Lanolin can be very difficult to remove, that was why I asked. People I know have contaminated their stainless wet tumble pins with the lanolin. Woolite instead of dish soap in the wet tumbler is said to do a good job cleaning the pins up if they end up with lanolin on them. The traditional swage lube has quite a bit of lanolin in it ?
Some folks that have an extensive swaging info page setup use marvel mystery oil as a lube to squirt cores, then clean them with coleman fuel.
Here is the thread where that is mentioned, IMHO core swaging is not as demanding lubricant wise as the rest of the process involved in making bullets. This guy was using 6oz of marvel in 1 gallon of acetone.
https://forum.accurateshooter.com/th...video.3900058/
Just wondering if the coleman fuel is actually removing the lanolin from your cores or not.
Bill
Both ends WHAT a player
your cores are not clean wash them in simple green rinse with very hot water then one more bath in white gas let dry make sure your hands are not oily when you drop them in your jackets keep all of your jacket's - cores CLEAN
Ron
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |