Add "and Technique" to the title. How do you approach adjusting the die/punch/which holes to plug when the bullet to be sized and lubed has a small band separating a single lube groove from the crimp groove? I end up with lube on the bullet nose, in the crimp groove and many times the gas check. There is too much lube per stroke to suit the bullet. I tried short stroking the lube but doing so causes lube to enter the die between bullets - I guess because the there is still lube pressure at the die while the piston returns and I cycle in another bullet?
Hope my description isn't overly confusing. In a nutshell; assuming I get the timing right (punch length adjustment) the bullet is seeing too much lube per stroke so it winds up everywhere.