Just out of curiosity - there are a LOT of choices out there. What is your favorite choice?
Just out of curiosity - there are a LOT of choices out there. What is your favorite choice?
2nd Amendment of the U.S. Constitution. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."
"Before you argue with someone, ask yourself, is that person even mentally mature enough to grasp the concept of different perspectives? Because if not, there’s absolutely no point."
– Amber Veal
"The Highest form of ignorance is when your reject something you don't know anything about".
- Wayne Dyer
H&G # 503 and 4.8 gr WW231. A +P load.
Collector and shooter of guns and other items that require a tax stamp, Lead and brass scrounger. Never too much brass, lead or components in inventory! Always looking to win beauty contests with my reloads.
Been buying Hornady Critical Defense for my .38 and .380.
3.1 grains Bullseye & Lyman full wadcutter. Accurate, easy to shoot, and penetrates well. The big flat nose creates about the best possible wound cavity for a non-hollowpoint boolit.
Currently casting and loading: .32 Auto, .380 Auto, .38 Special, 9X19, .357 Magnum, .257 Roberts, 6.5 Creedmoor, .30 WCF, .308 WCF, .45-70.
Speer Gold Dot 135 grain short barrel +P.
https://www.speer.com/ammunition/han...9-23921GD.html
”We know they are lying, they know they are lying, they know we know they are lying, we know they know we know they are lying, yet they are still lying.” –Aleksandr Isayevich Solzhenitsyn
My Straight Shooters thread:
http://castboolits.gunloads.com/show...raight-shooter
The Pewter Pictures and Hallmarks thread:
http://castboolits.gunloads.com/show...-and-hallmarks
38 special +P 158gr lead HP.
Maker of Silver Boolits for Werewolf hunting
For my vintage 1972 Charter Arms Undercover .38 2" I use 148 grain DEWS w/ 3.5 grains Red Dot. for 785fps. Pretty accurate. Plus those guys do a pretty good job of tearing up a wet phone book.
Last edited by Electrod47; 09-06-2022 at 10:38 AM.
“You should tell someone what you know. There should be a history, so that men can learn from it.
He smiled. “Men do not learn from history. Each generation believes itself brighter than the last, each believes it can survive the mistakes of the older ones. Each discovers each old thing and they throw up their hands and say ‘See! Look what I have found! Look upon what I know!’ And each believes it is something new.
Louis L’Amour
The Californios
Brassfetcher has some good data here for several of the loads already mentioned.
"Totalitarianism demands, in fact, the continuous alteration of the past, and in the long run probably demands a disbelief in the very existence of objective truth.” --George Orwell
I like a +p 158 grain HP. I have used Winchester and Remington, but lately I have been making my own, owing to the lack of product on the shelves. A 358-429 MP HP mold casts right at 159.0 grains and loaded on top of 4.5 grains of WW231 or 5.8 grains of Power Pistol makes for a good duplicate.
For my aluminum framed snubbies, I use a Winchester mid-range wadcutter. I bought a case of them years ago, but never got around to using them up and still have half a dozen boxes.
Last edited by rintinglen; 09-06-2022 at 10:51 AM.
_________________________________________________It's not that I can't spell: it is that I can't type.
Either a Speer 135 gr short barrel GDHP, or a 158 gr SWC over a +p charge of Power Pistol.
Wen or Rem 158 gr SWCHP +P in 2" barreled revolver. I\d like to ge the Speer 135 GD's to try and compare.
Buffalo Bore .38 Special +P 158 grain SWC-GC HP. Over 1000 fps from a 2" snub and mid-1100s from a 4".
https://www.buffalobore.com/index.ph...t_detail&p=108
https://www.youtube.com/watch?v=mPnCWwXHuIY
https://www.youtube.com/watch?v=GTJYsc6PdEM
3.5 of Bullseye with a Lyman 358432.
Both accurate and sufficiently powerful.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |