Got anything to get me started on the 4in? Have brass, powder etc
Got anything to get me started on the 4in? Have brass, powder etc
I Am Descended From Men Who Would Not Be Ruled
Fiat Justitia, Ruat Caelum
There is enough fat in the federal government that if you rendered it you could wash the world
Ronald Reagan.
More interested in the powders people have had success with to weed out stuff to not waste time on
I Am Descended From Men Who Would Not Be Ruled
Fiat Justitia, Ruat Caelum
There is enough fat in the federal government that if you rendered it you could wash the world
Ronald Reagan.
I don't own a 10mm, and I've only reloaded 100-200(ish) rounds for it, but what I see used the most is Alliant Blue Dot, AA#9, Hodgdon HS-6, Longshot, and Ramshot Silhouette. Except possibly for AA#9, these propellants tend to be widely used in .38 Super, also.
For in much wisdom is much grief: and he that increaseth knowledge increaseth sorrow. Ecclesiastes 1:18
He that troubleth his own house shall inherit the wind: and the fool become servant to the wise of heart. Proverbs 11:29
...Verily I say unto you, Inasmuch as ye have done it unto one of the least of my brethren, ye have done it unto me. Matthew 25:40
Carpe SCOTCH!
I have a Glock Model 40 10mm. I first tried a WC820 aka AA9 with powder coated 180 gr bullets. Nothing else I have played with comes close, Power Pistol, 800X, or Silhuette. This is a 6" bbl if that changes things.
[The Montana Gianni] Front sight and squeeze
I load for a Delta Elite and Blackhawk 10MM/40SW using PC'd Lyman 401043, 401638 and 401654 over Red Dot/PROMO, Unique, WSF and 800X and have not been disappointed yet.
COME AND TAKE IT
Let’s Go Kammie the Kommie!!!!
Blue Dot is my go to 10mm powder. 2400, AA#9 and Longshot come in second.
Power Pistol and Longshot have been mentioned a couple of times so ill start there. I have much Unique and Promo so out of the 4 im sure ill find something that works well.
I Am Descended From Men Who Would Not Be Ruled
Fiat Justitia, Ruat Caelum
There is enough fat in the federal government that if you rendered it you could wash the world
Ronald Reagan.
I loaded up some 180 grain AMEC cast boolits with red hi tec coating a buddy gave me for my Glock 20. He gave me a box of 500 of 10mm and a box of the same in 9mm. I used 5.8 grains of green dot. Did a ladder test up to 6.2 grains but haven’t tried them yet. Drops casings within point blank to 5 feet away and cycles perfectly. No leading to boot. Tried green dot because I picked up a 8 pound canister for basically nothing on a group buy. The only other powder I have is less than a pound of HS6 that I save for the couple of boxes of 180 grain XTPs I just picked up.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |