Problems I came across. Now it might be worth noting that I'm sizing LEE 356-102-1R https://leeprecision.com/mold-dc-356-102-1r.html maybe it isn't meant to work with such small boolits.
- Bullets fell at an angle and jammed up the press. Took me 15 minutes or more to figure out the tube holder to slider distance for successful droppings
- Have to drop boolits in one at a time which is time consuming
- Weight of boolits in tube wouldn't allow slider to go all the way to the sizing die
- I had to push the slider forward due to the above issue until maybe 10 boolits were left in the tube then it functioned correctly
Maybe it's a learning curve and I'm not going to give up on it, but I am less than impressed at this point.