This is a repeat of a question I asked at the tail end of another thread.
I recently have acquired a 32-40. Have not as of yet reloaded or fired same but am in the component building stage.
After reading numerous threads on case lube, dies, using 30-30 / 32 Win Sp., 30 American, 38-55 as parent cases and failures etc.
I thought I would ask if anyone has experience with a reforming die set that RCBS markets to resize 38-55 down to 32-40. vs. just using the 32-40 sizing die to accomplish the task.
The number on the RCBS box is 58220 CSDS .32-40 Win from 38-55 Win
I can only presume that this specialty die set is tapered in such a fashion as to be less likely to wrinkle / fold or damage the cases. I know if too much lube is used or if the standard resizing die is not cleaned, a buildup of lube can acause problems.
Thanks in advance.
Bob in Saint Augustine.