how do you load them? what size, dia. cast lead head, RB. or BULLET? & powder charge? thanks'.
how do you load them? what size, dia. cast lead head, RB. or BULLET? & powder charge? thanks'.
Try the link below.
Dave
https://civilwartalk.com/threads/gal...quired.182975/
"How a politician stands on the Second Amendment tells you how he or she views you as an individual... as a trustworthy and productive citizen, or as part of an unruly crowd that needs to be lorded, controlled, supervised, and taken care of."
--Rep. Suzanna Gratia Hupp (TX)
dirtball. yes a great site. thanks.
it is an original one.
It’s essential that you slug your bore. The average bullet size(groove depth) runs .520 to .525. That’s going to be too big to fit in the case. I can fit a .517 in my cases with a sharp rap of my seating tool, but my Erma with a relined bore has .515 groove size. You are probably going to need a heeled bullet. Moose Moulds makes a mould that may work for you. Accurate Moulds should be able to make one that suits your needs. Check out the forum on the N-SSA website,
www.n-ssa.net and do a search for gallagers.
varsity07840, thanks' for that great advise. will do. I bought some heads from S&S and they will not fit in the cases, same with some that I bought from TOTW. t both do not have a heel to let it enter the case. when tapped with a mallet they go in cockeyed. I am going to go with a RB.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |