i recently got a mold for making 11mm gras but im unsure as to weather or not i need a 446 sizer or 447.
NVM the question on the mold CBE said it is in fact for grease grooved bullets
i recently got a mold for making 11mm gras but im unsure as to weather or not i need a 446 sizer or 447.
NVM the question on the mold CBE said it is in fact for grease grooved bullets
Last edited by Danm55; 05-29-2022 at 11:26 PM.
disregard the question about the mold
Is this the heeled mold with the .453-5 diameter stop ring?
either will work, just what chambers best.
I would recommend slugging the barrel.
years ago, I owned one that was WAY over spec (.454), I'm not sure how rare (or common) it is to be that oversize? but that's the first bit of info I would want, when trying to figure out what size boolit.
https://castboolits.gunloads.com/sho...ch-appreciated
~~~~~~~~~~~~~~
“If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
― The Dalai Lama, Seattle Times, May 2001
Slugging the barrel is always the best starting point.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |