does anyone know if 30 cal bullet jackets can be swaged down to 6.5 cal. i have several thousand 30 cal jackets of unknown origin and already have several thousand 308 bullets so was just wondering if it can be done
does anyone know if 30 cal bullet jackets can be swaged down to 6.5 cal. i have several thousand 30 cal jackets of unknown origin and already have several thousand 308 bullets so was just wondering if it can be done
Yes, you can draw the 30 cal jackets down to 6.5 without problems, you just need the tooling. I draw 44 jackets down to 40 cal.
"I Make the part.............................that makes the parts"
Looking for Bullet Mould Handles, Heavy Duty Replacement Sprue Plates, Adjustable Paper Patch Bullet Moulds? Check here:http://www.kal.castpics.net/
My Feedback!
http://castboolits.gunloads.com/show...Red-River-Rick
Here's a link to Corbin's website regarding jacket reducing dies: http://www.corbins.com/drawdies.htm#jrd
"I Make the part.............................that makes the parts"
Looking for Bullet Mould Handles, Heavy Duty Replacement Sprue Plates, Adjustable Paper Patch Bullet Moulds? Check here:http://www.kal.castpics.net/
My Feedback!
http://castboolits.gunloads.com/show...Red-River-Rick
You can do it with out issues. If you know what you want they will make punches to suit for tapered jackets and the like. I make .172 jackets out of .224 jackets. I purchased a draw trim die which draws the jacket down and trims it to a given length that you want. Best die I ever purchased from Dave Corbin. Draw and trim in one go. Punches do wear though, so get a couple punches when ordering. Make sure you have an ejection system that will work for that type of die. I had to build one from scratch but works a treat.
You may need to anneal first.
Bill
The bloke out in the field is always right until proven otherwise.
thank you guy. I appreciate the info.
One more Question; how is accuracy with reswaged Jackets?
My little 17 shoots them well. I have shot some awesome groups and dead is dead. At the end of the day that is all I need.
Bill
The bloke out in the field is always right until proven otherwise.
Thank you Bill. Just saw you are in Tazzi. my best friend was raised on king Island down that way lives near Perth now.
Yes, easy and as long as the draw die is made right , There will be no issues in the accuracy department
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |