Gents,
I wanted to post an update on my experiments with Magtech Brass in 28 Gauge using smokeless powder. As suggested in my recent post I am using Longshot powder and circle fly cards and wads. My first attempt was a blooper and it appeared that I needed more powder and that I needed more pressure. I did get pretty good results from my last load listed below:
Magtech 28 Gauge brass
Magnum pistol primer
14 grains Longshot
2 nitro cards
Fiberwad
3/4 oz shot
Overshot card
Water glass seal
I am open to any suggestions to improve shot pattern and range.
Thanks