Anybody here own a set of RCBS dies in 32 Long from the 1980s or so? If so, can you tell me if the seating die is capable of crimping a 32 Short or is it too deep?
Anybody here own a set of RCBS dies in 32 Long from the 1980s or so? If so, can you tell me if the seating die is capable of crimping a 32 Short or is it too deep?
Mine are carbide and came in the grey plastic box. I got them used, but I’m guessing they’re too new for you, right?
Froggie
"It aint easy being green!"
I don't know but am just curious if the crimp "ring" is too deep for .32 Short, the brass of which is only about .600" long.
LeadHead72,
You can always call RCBS and ask them.
I have a set of RCBS dies from mid 80's for 32 Long/32 ACP w/ different expander stem for each. They will not crimp 32 S&W. I have used the size die sans decapper to give a little crimp. FWIW Regards, Woody
Take a kid along
I crimp mine in my 310 die set in a TrueLine Jr press. Works fine!
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
As I recall, the Lee set we have is marked 32 ACP/32 S&W/32S&WLong/32H&RMag
I have loaded all 4... but... do Not recall the crimp set-up for S&W... Will check in next couple days!!
Edit... Joys of Turret Press, one bolt and Checking... No.. These will Not Roll crimp a 32S&W... Long and H&R Mag??? Yup
IDK how anyone decided this seating die was gonna do much of anything except seat a Bullet on a 32ACP???
Last edited by racepres; 04-12-2022 at 05:28 PM.
My Lee die set will crimp the short one. Might see if a .32 ACP die will crimp enough for you needs.
Box says "32 Smith & Wesson"
Lee's website:
3 DI SET 32 S&W CARB
Lee 32 S&W Pistol 3-Die Set includes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
I assume they will load anything longer than the 32 S&W just like .38 Spl dies load .357 mag and max.
Midway has that Lee 32S&W set in stock.
https://www.midwayusa.com/product/10...832053#reviews
I used my Lee 32 ACP seater die to crimp the handful of 32 S&W cartridges I have loaded.
_________________________________________________It's not that I can't spell: it is that I can't type.
Midway USA had the correct dies for around $41 or so, and free shipping on orders of $49 and above. So I added a couple of items to get over $49 and everything arrived in the mail yesterday. Thank you everyone for your input.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |