Sadly time is not on my side, i get so few hours free to dedicate to messing with them. I have been tinkering with the melting pot, i hope to have a new enclosure for it soon. K thermocouple will be fitted, possibly two, as they are cheap as chips and saves me opening it up if one was to go bad. I have the ceramic fibre insulation already
I hope to cast a few from each mould set i have as not all of them have sizes written on them, so it's a mystery of what i have till i get to fill them with lead. They are well used but he did a great job if repairing them, hopefully they have more life left in them, some i'll probably never use. See if i can attach a picture of moulds i cleaned up yesterday. There are more, one set is in a machine carousel, the others i haven't cleaned as they are in a bad way and of a size i don't see me using for some time. Some even have quite a bit of rust inside, so that will be an interesting job to clean out.