When I was shooting a lot of .38 Special lead bullets through my Ruger GP100, it would lead up terribley. This was around 1990 and Outers sold a reverse electroplaiting kit that would remove lead or copper. The first time I used it I was AMAZED how much lead it removed from the cylinder bores and the barrel AND it didn't harm the finish on them.
Over the years, I've used it on any firearm that leaded up.
BUT last year I used almost all of the leadout and tried to buy some only to find out that Outers no longer manufactures it! So I did a search on the internet, found a website that gave the chemicals for the solution, then bought them from an online place in PA called Post Apple Scientific, Inc. 8893 Gulf Road, North East, PA 16428Phone: 814-725-3330 (
http://www.postapplescientific.com/ ). The water is distilled water (I found it at the loacl gorcery store!). The chemicals are lead acetate ACS crystals 100 G bottle and liquid amonia acetate .010% solution in a 500 ml bottle.
I can't find the website right now but it was pretty straight forward as to the mixture of water to crystals to liquid chemical.
I haven't as yet mixed the chemicals together though but from people who mixed their own said it worked exactly like Outers Leadout.
http://castboolits.gunloads.com/show...-Plus-solution
PS: I just did a search and wouldn't you know it, there is a post telling how much to mix each cemical!