Been trying the VHT (gloss Black) spray coating on 311291 & 311466. Used a Q- tip w/ acetone, rubbed the coat off 1/2 the nose on a test bullet, then stood up on the base and using a 2# hammer " wacked that thing" 3-4 times, coating did not come off the 1/2 w/ the VHT, then laid the bullet on its side wacked it 3-4 times (pretty darn flat), VHT still not cracked or chipped. The VHT did not come off the grease groves, inside or out.
So how important is the Acetone test?
coffee's ready, Hootmix.