This is how I mounted mine:
Hope this helps.
Fred
This is how I mounted mine:
Hope this helps.
Fred
After a shooting spree, they always want to take the guns away from the people who didn't do it. - William S. Burroughs.
"After that, it's simply a matter of lubing the bullet and brass, jamming the bullet into the brass (which bevels the rim into a boat tail); reversing the bullet in the same setup and swaging the lead front to form a soft point."
Liberty: probly don't want lube between core and jacket, but definitely want the jacket lubed to swage.
"Barely felt the lead compress and brass form..."
Yep, anneal step successful!
Range stars...
Last edited by a.squibload; 07-10-2021 at 02:28 PM.
When I started swaging I watched a lot of videos by Ammosmith Reloading and Hillbilly Angler (his channel had a different name back then) Between those two you can really learn a lot.
A vote for anyone other then the conservative candidates is a vote for the liberal candidates.
This is something I would like to try for myself. Has anyone here used the resulting bullets on game such as deer to know how they'll hold up and/or expand in an animal?
A vote for anyone other then the conservative candidates is a vote for the liberal candidates.
Tried: 20 lbs. Lee melting pot works perfectly for annealing the cases. Thank to all about the input!
Tried: Lee case cutter mounted on a drill and coupled to a shortened .40 S&W Lee case length gauge works quite well, without having to buy a more expensive saw.
Attachment 296881
Food is overrated. A nice rifle is way more important.
Rob
I will certainly try yours too, because I scattered brass dust everywhere
but anyway I shortened them without sawing them by hand, and for me it is already a result
among other things, I tried Imperial Sizing Wax, because I had nothing else at hand.
in my case it worked well in all the swaging steps where I used my RCBS Ammomaster and without particular effort .
Last edited by wilecoyote; 02-28-2022 at 05:36 PM. Reason: Imperial Wax
Food is overrated. A nice rifle is way more important.
Rob
From what I have read in the past just about anything that can be used to size brass can be used for swaging in steel dies. (I will probably catch it for that one.) It's just that when I started the Lanolin/Castor oil mixed seem to be the standard for homemade. I did this back when Obama was first in office and still have two 4 oz. jars in the freezer, I haven't started to think about using.
A vote for anyone other then the conservative candidates is a vote for the liberal candidates.
what I had on hand at the time can have unexpected results, sometime even more when I make mistakes or reverse some instructions . not perfect, but the fun has just begun...
Food is overrated. A nice rifle is way more important.
Rob
among my other strange trial-error results, I see that it is possible to obtain something with brass that cover the tip more, accentuating the ogive profile. not of great use in revolvers, but perhaps useful in leverguns where feeding can be critical, and a rounder, or more tapered anyway, nose preferred.
the only additional die used is a .45acp seater, here.
Last edited by wilecoyote; 03-05-2022 at 12:44 PM.
Food is overrated. A nice rifle is way more important.
Rob
I heat them both together. The kiln is completely enclosed, with no venting, and I don't open it until the inside temperature is down to about 250 degrees F. People I've talked to about this speculate that the lead and brass are joining at the molecular level, but I'm just a hobbyist, not a scientist, so I'll just take their word for it.
You don't want to heat lead to those temperatures if you'd be breathing the vapors from it, so yes, it is a little high for lead. My goal was to make the core and jacket "as one", and I accomplished that without the use of flux.
Hope this helps.
Fred
After a shooting spree, they always want to take the guns away from the people who didn't do it. - William S. Burroughs.
Keeping track of this, another thing to try.
I have a bunch of ready .401-175grs. pure lead slugs.
a Lee 20 lbs. furnace, and the .40 cases to be annealed _
I would like to understand if, since .40 cases have to be annealed anyway, and we want to insert our 175grs-.401 slugs, cast by Lee mold, it is not easier to insert the ready slugs in the cases first, and then place all 50 pieces, with the case mouth up, in the lee 20lbs. electric pot. (50 pieces fit right, upright, in there) _
beyond the use of flux (bonding is not my goal, now), etc., certainly the pure lead would have to adapt perfectly to the cases thanks to the fusion induced by the brass annealing.
what I do not know is whether the cases thus filled can then stress the press (RCBS Ammomaster) more than allowed,
or make it more difficult to obtain the j.44 during the forming in the 7x57mauser die.
before my next mess, pros & cons are really welcome. thanks to all
Last edited by wilecoyote; 03-15-2022 at 09:48 AM.
Food is overrated. A nice rifle is way more important.
Rob
A vote for anyone other then the conservative candidates is a vote for the liberal candidates.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |