Just got a Lee 309 - 113 - F Want to have my 30/30 Marlin for the grand kids to plink and don't want to use too much lead. Also have a Thompson Contender in 30/30 and with the light bullets it won't kick as much.
Just got a Lee 309 - 113 - F Want to have my 30/30 Marlin for the grand kids to plink and don't want to use too much lead. Also have a Thompson Contender in 30/30 and with the light bullets it won't kick as much.
NOE 5 cavity 432224. Now just need the mountain of snow to melt so I can get out and cast.
Lyman 356637 HP. If the drawing I found is right, this will work in both my 9mm and .357SIG.
I have a .378, 250 grain flat nose plain base two cavity mold on the way, got the shipping notice. Not crazy about the mold itself, but it is what I think I want for powder coating in the Win 375 at near 2,000 fps.
I loaded two rounds using a 270 grain SP bullet with 1680 and the new Star Line brass yesterday, just to check feed, seating, etc. So far so good.
Does not mean it will shoot, only that it loads and feeds as loaded, I will work the accuracy problem when we get to that point.
“There is a remedy for all things, save death.“
Cervantes
“Never give up, never quit.”
Robert Rogers
Roger’s Rangers
There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves.
Will Rogers
Lee C358-200 RF 6 hole
NOE 260-105-FN for my .250 Savage bolt actions. This is a 4 cavity mould. I seasoned it per the instructions and began casting the next day. Boolits dumped very easily. There were some very slight imperfections in looks, but when samples of each drop were measured, they all weighed within .3g and were right at 105g with gas check and lube. The gas check fit was great . I'm a happy camper. Now I'll have to see if I can duplicate the .828" 5 shot group that I obtained with some boolits of this design that were gifted to me.
It's all chicken, even the beak!
465 grain .50 caliber design to try out in a TC New Englander.
Lee 1-Cavity Improved Minie Ball Bullet Mold 533-410M (533 Diameter) 410 Grain. I've never used a mold like this.
Just recieved my new Lee .490 Roundball mold. Got it all prepped, and blackened already. Its eady to do some casting for my flint lock.
Dave
Miha has the 200g RCBS .358" back in stock, got the email this morning. Got it to feed my 350L "not an assault weapon". Shipping is up to $26.50 and I was looking hard at the H&G 68 too but I don't have a 45 .... yet.
I got the 8 cavity aluminum gas check version, it's going to be raining boolits.
Mal
Mal Paso means Bad Pass, just so you know.
Gotta love old school Lyman pin moulds. Received the 12ga slug mould today. Any idea what my weight should be with this one? I’ll be using soft lead.
Attachment 297081
This one; https://www.mp-molds.com/product/358...mold-gc-or-pb/ Ordered it Sunday and it came yesterday. Been dropping very nice shallow cup points with 20/1. Right at .358" as cast like promised. Going to try some with HS 6 and see how fast i can push them. 1100 fps would be fine.
Well it was 7 days shipping from Slovenia because it hung out at the aerodrome all weekend then Vienna, Paris, London then here only to be thrown into a 400 degree oven. It's the 360-200 GC RCBS Clone in an 8 cavity aluminum mold. The Gas Checks arrived today too. Gotta go get the pot started.
Mal
Mal Paso means Bad Pass, just so you know.
I received an Accurate 31-105L It came in two weeks instead of the advertised eight and looks great. It will be used in a S&W .32-20.
I ordered two MP molds yesterday: 359-125 hp and 402-160 hp. Both are 2-Cavity molds and are my upgrades from my Lee molds.
MP 359-135 8 cavity aluminum mold. Ordered it Saturday, got it Friday afternoon.
So, I just finished my first test casting session. Using an alloy of 9 lbs of range lead, 1 lb of linotype and 5 ounces of 40/60 solder (92/2/2 or thereabouts), bullets are dropping at an average of 132 grains and .360 diameter. Early indicators are very positive.
Last edited by ChuckS1; 03-18-2022 at 05:26 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |