I got a kit that is missing parts.
Any on-line parts breakdown someplace???
I know I'm missing the wood and maybe loading rod barrel.
Rest of it looks to be there, but I'm not sure.
Any idea where I might got some parts??????
I got a kit that is missing parts.
Any on-line parts breakdown someplace???
I know I'm missing the wood and maybe loading rod barrel.
Rest of it looks to be there, but I'm not sure.
Any idea where I might got some parts??????
There is usually a lot of jukar parts on E bay, which pistol?
Stamped Jukar Spain .45cal
9" barrel.
Is it a round barrel?
I have a Jukar .45 round barrel that is about 9" long.
I plan to build a stock for it and just use a lock from another pistol , and probably make the trigger and trigger guard.
It will be my Custom design.
But it is way cheaper and faster for me then to try and find Jukar parts on the net.
But Good luck on your project.
If you know your model number or style , parts can be found on auctions.
Prices are kind of high , but not too bad.
But it is the shipping costs that drive the price out of range.
I built a gun out of an old pistol barrel I found at a yard sale back in the '70s.
I inletted the barrel in the end of a wood baseball bat , and I shot it with two hands.
The lock for that one was hand built.
Last edited by LAGS; 02-20-2022 at 07:58 PM.
Most of the Jukar stuff was CVA from back in the 70's & 80's I'd give deer creek products a call and see if they have any spare parts left.
Might shoot me a PM if it's a Philly ranger type . They didn't have a ram rod but used a long starter ball/rod well .
In the time of darkest defeat,our victory may be nearest. Wm. McKinley.
I was young and stupid then I'm older now. Me 1992 .
Richard Lee Hart 6/29/39-7/25/18
Without trial we cannot learn and grow . It is through our stuggles that we become stronger .
Brother I'm going to be Pythagerus , DiVinci , and Atlas all rolled into one soon .
Octagon barrel.
No idea what model it is.
I think this is the one I have.
Attachment 296621
I believe that is the Kentucky pistol model.
Aim small, miss small!
The barrel is stamped Spain, so I was thinking it's a Spanish model.
Unless it's made in Spain.
I have a Spanish Made Kentucky Pistol.
As well as a Philadelphia Derringer.
I think they are both Jukar.
I picked them up used at a LGS very cheap then refinished them to good working and display pistols.
Don't let that Jukar fool ya,they shoot very well with .440 RB and 25 grs 3F.
Have one for over 30 years, and yes they are shooters. Years ago I accidentally "launched" the ram rod down range but was it was an easy fix to make a new one. Check out Track of the Wolf and other BP sites for bits and pieces. As others have said, it is the Kentucky model and awesome to shoot.
West of Beaver Dick's Ferry.
try deer creek products.
jim44-40, you are sooo right!
I think that what it's suppose to look like.
Got the picture off the web.
Sights, nipple holder, hammer lock, all look the same.
Not sure about the barrel or trigger.
Hard to tell without the stock.
Still can't find one.
One on ebay, but it's a short barrel.
I think mines need the stock for the longer barrel.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |