OK ... Im on 2 day of power coating .... ordered these during the summer last year.
Day 1 did a batch on reg alum foil .. Surprise they stuck to it
My cook time is app 14 min , Time for bullets to gloss over plus 10 min, hammer test good sticking when powder does stick
read some of the PC posts ... one is 40 pages long and 8 or so years in the making and after reading most of it i am not retaining most of it it
--------------------------------------------
Picked up 4 gloss colours.... read best results using gloss polyester, so that is what I though I had bought
Bought from prismatic powders
first letter P = Polyester
2nd letter S = Solid P= top coat
having some problems I have tried 3 of the 4 powders and only getting 1 good result .... Dry powder Bowl bb
Are these the correct powders, or do I need a spray gun for the powders that do not work ?
Bright Green PSB 5945....works great did some 38 wc, 44 mag, 40
Bright Green is a bright, nearly neon, green solid tone. This color is a polyester solid tone powder coat and has a high gloss finish.
High Gloss: 85+ Gloss Units
--------------------------------------
JUST ORANGE PSS-4045
I tried it with 3 differts bowls with BB and with out 3 different bullets it would not stick .... Stuck very well to the side of the bow
is a bright construction orange with a smooth appearance. This color is a polyester solid tone powder coat with a high gloss finish.
High Gloss: 85+ Gloss Units
l
-----------------------------------
Card Black PSS 1523 ... Not wanting to stick played with at a bit for some 30 cal results soso ... had to do 2 coats
Card Black is a deep black. This color is a polyester solid tone powder coat and has semi-gloss finish.Semi-Gloss: 37-70 Gloss Units
----------------------------------
Cannon grey PSS 2748 Not wanting to stick, so mixed it with some of the above green and had to do 2 coats
Cannon Grey is a dark blue/grey. This color is a polyester solid tone powder coat and has a high gloss finish.High Gloss: 85+ Gloss Units
---------------------------------------------
PPB 6415 Rancher red .. not tried ..
... ordered this by mistake as I was not looking for a top coat power at this time
Rancher Red is a rich red top coat. This color is a polyester top coat powder coat with a high gloss finish
So Why am I have problems .. wrong power ? doing it wrong ?
the Just orange maybe had a 5-10% coverage and was not worth baking, when still in bowl
tried 1 teaspoon tried 2 teaspoon .... just does not want to stick
-----------------------
Help, thanks
ps I now have bb . nsaf , icecube tray for the 30cal
Now using a round rubermade bowl with a air tight lid #5 .... keeps the dust down a lot better than one of the other bowl I tried
and working on a pid for the oven, as some of the batches got to hot and changed colour
I did Pick up one trick
Using nitride gloves ... if you have a bullet that has a thin spot on it stick the tip of your finger in the powder and tap the bullet on the bare spot, then pick it up and place in oven tray