Now that I've tried it I have a few questions. Obtained powder from Smoke 4320 so that should be good. I'm not trying to win a beauty contest with finished product.
BEFORE I remove the bullets from the CW container with a pair of giant tweezers I notice tiny bare spots in the powder coverage. After firing in the kiln the pinhead sized bare spots are still slightly noticeable. Should I be getting 100% solid coverage? Secondly, I notice a very few of the BLACK bb's in the CW container are not coated with paint powder and are quite noticeable amongst all the other coated bb's. There is still powder left at the bottom of the container. Could the brand of bb's be at fault? Input would be appreciated...