In the endless search for the newest, best coating, I tried some BCB coatings, I'm not impressed... purple, before and after baking
Sent from my SM-G973U using Tapatalk
In the endless search for the newest, best coating, I tried some BCB coatings, I'm not impressed... purple, before and after baking
Sent from my SM-G973U using Tapatalk
Please explain what you don't like about the coating.
Sent from my Pixel 4 XL using Tapatalk
I much prefer the dark gray look to the purple. I would think of this as a win win situation.
What in the world is BCB?
“Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem.” Ronald Reagan
https://www.bcbcoating.com/shop/
Like hitek, but supposed to be "better".
Better coverage
Lower odor in curing and shooting...
More, brighter colors, well, maybe not...
Sent from my SM-G973U using Tapatalk
Last edited by 10sandxs; 12-31-2021 at 10:58 AM.
Unless your throwing underhanded critters/target ain't gonna notice !
I get facebook ads from BCB weekly. I always respond and ask how they perform. No credible answer yet from any posters. I asked about BCB on this forum several months ago and got blank stares. As far as I am concerned, this forum is the gold standard for alternative coatings, but BCB has not found it's way here yet, except for this one thread.
Will the OP shoot some and get back to us?
Looks fine to me but I UNDERSTAND you were hoping for a bright purple. Hopefully they shoot better then they look for you. To me looks like the powder coated well and was even.
Stop being blinded by your own ignorance.
The goods and the bads...
Goods
1) the blend of ethanol and acetone leaves the coating wetter longer so a smoother finish is easier to obtain than with hitek. This solvent cut would probably do the same with hitek, but I haven't tried yet.
2) Coating is durable and cured at 385f for 20 minutes. Passes smash test. Slight transfer in the acetone test.
3) the coating looks more like powder coating than hitek does.
4) solvent flash is faster to get smooth bullets than with hitek. Just a few minutes vs 10+ under a fan with hitek.
The bads
1) color goes off dramatically when baking
2) advertised cure time of 10 min at 365 (alloy temp) is misleading as it takes about that time for the bullet core to get to 365 in a 400f oven. (12 min to be exact) so the actual prescribed cure time is mire like 20 min...
3) coating was sent in small ziplick bags. The zips get filled with powder and it is fine enough that the bags are exceedingly difficult to seal again. I ended up putting the material in an empty hitek jar.
4) (minor) the mixing instructions state to shake vigorously and let sit for an hour to allow all the powder to dissolve. More pre-planning needed.
4) The concentration of powder in solvent is 20% vs 14% for hitek, and they also recommend adding more of the mixture (20-30% more) than hitek so you will use more material to coat the same number of bullets.
5) two solvent blend instead of 1.
Commentary
I fired a hundred rounds yesterday in my bullseye 45. Shot as expected with no issues and no leading. Coating doesn't impact accuracy out to 50 yards in my 45s so the coating does what coatings do with respect to leading
My issue is I cast using three molds for the same bullet profile (I shoot a lot) and have been using different colors to signify which mold the bullet came from. I also use colors to differentiate different load combinations so while functionally its just a coating, I'm using the visual aspect as a sorting tool as well, which is why color is important to me.
Sent from my SM-G973U using Tapatalk
I got some to try out to see if I liked it. I already PC and have been using HiTek for years. I hope to be giving it a try soon now that the holidays are over.
I'm guessing the target, perp or critter won't care about the color. You put the work into coating them, now shoot them. You can always cast and coat new ones in any color.
I think it’s a passing fad and I will continue to lubricate my cast bullets!
Last edited by smithnframe; 01-04-2022 at 07:07 AM.
I contacted BCB.they said "purple is super temp sensitive... were working on it..."
I'll try some.other colors when I have more bullets to coat
Sent from my SM-G973U using Tapatalk
Sounds very similar to HiTek, maybe even the same type of technology/chemistry. HiTek has been trying for years to make a heat stable blue.
I’m good with HiTek’s range of colors, so I’ll stick with the Aussie original rather than this South African variant.
Nothing like HITEK.
Closer to Powdercoat mixed with Acetone and some other solvent.
I tried the black and Honestly far too much mucking around compared to HITEK.
Longer bake time, Longer first mix reaction time. Very Dull.
I'll stick with what I know works from a commercial standpoint.
Hooroo.
Regards, Trevor.
Australia
Almost exactly like hitek, even down to the smell when coating. They want a different solvent mix, but ethanol and acetone isn't that big of a change and hitek suggests this to slow evaporation as well. I don't think the 1 hour soak time to dissolve is really necessary but I do it. You are putting it on heavier than hitek suggests so that is why it looks more like powder. The pigment package seems a bit heavier as well.
That said... tried "black cherry" last night... lots of black, no cherry...
I won't buy it again, as hitek is same price and works pretty good.
Sent from my SM-G973U using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |