If you could possibly post some pictures of the wooden barrels it would be appreciated .
If you could possibly post some pictures of the wooden barrels it would be appreciated .
I use it for 444 Marlin and 45-70 as well as many bottle neck rifles for cast bullet loads
444 Marlin and 45-70, GREAT accuracy!
Art
”Only accurate rifles are interesting”
——Townsend Whelen
In a time of universal deceit , telling the truth is a revolutionary act
—- George Orwell
Just got a couple pounds for the 45-70. Worked nicely.
It works quite well for my purposes. 18.5 grains and 311291
I wanted a plinking CB load that fed (hence the round nose) and a powder that filled the case as much as possible while cycling the action with the OEM gas block. cases are only being tossed a couple feet. Accuracy is mini-30 acceptable.
I'm too cheap to buy the custom gas block or the smaller diameter gas bushings.
Originally Posted by Theodore Roosevelt
I would be interested in seeing pictures of these wooden powder casks as well. What a cool find!
This is an old post but a lot of load data here. Use the drop down menus under the pictures on the right.
https://shop.hodgdon.com/hodgdon/hod...194.1637765153
quando omni flunkus moritati
I use it in 45-70 for full power loads, 223 and 308. Its good.powder
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |