So I am a bit of a dumpster diver and scrap yard scrounger, I have obtained a few 2 inch thick saw cut pieces of cast iron roughly 8 inches in diameter.
I am giving thought to actually designing and maching a "progressive " press similar to a star universal for rifles/50 bmg.
My thoughts for the stations are as follows
1. Full length sizer
2. Primer pocket swage
3. Primer seating/neck expanding
4. Powder
5. Powder check
6. Seat bullet
7. Crimp bullet
8. Station for new case to be acceptable from case feeder.
If anyone can think of any more needs for stations I am going to add to this projects blue prints.