Has anyone tried the Lee 314-90swc in the 300 Blackout. Looking for a Load that will cycle in the AR
Has anyone tried the Lee 314-90swc in the 300 Blackout. Looking for a Load that will cycle in the AR
I have had better luck in CBs for my 300BO with heavy bullets. The 311299 is a good fit.
beltfed/arnie
Have heavy bullet loads looking for loads for this bullet
Bullets will be PC, guess I could start with 125gr bullet loads?
I would start with your 2400 and the Nosler data for 110 grain jacketed. 14.0 grains start and 16.0 grains max.
”We know they are lying, they know they are lying, they know we know they are lying, we know they know we know they are lying, yet they are still lying.” –Aleksandr Isayevich Solzhenitsyn
My Straight Shooters thread:
http://castboolits.gunloads.com/show...raight-shooter
The Pewter Pictures and Hallmarks thread:
http://castboolits.gunloads.com/show...-and-hallmarks
I use that bullet with single shot and bolt 300 BO. I load 3 grains of bullseye for ~1000 FPS. This is a plinking and quite varmint load that groups very well up to 50 yds. For the AR 15's is use the C312-155 bullet and have to load short at 1.996 or so because of no lead much in the AR's. With this load I use 296 at 15 to 16.5 grains of powder for function in these rifles. I love the 300 BO for its versatility, No it is not a 300 whizz bang but it does 95% of what I need a firearm for. I believe with the 90 grain SWC to have enough gas to operate an AR it will lead badly. Just my two centavos...
Dang it! Who had the 2400?
Well, here’s the link to the Nosler data. They list both 4227 and H110 loads.
https://www.nosler.com/300-aac-blackout
ETA, I concur that if this is a plain base boolit you will have problems in a semi auto rifle.
”We know they are lying, they know they are lying, they know we know they are lying, we know they know we know they are lying, yet they are still lying.” –Aleksandr Isayevich Solzhenitsyn
My Straight Shooters thread:
http://castboolits.gunloads.com/show...raight-shooter
The Pewter Pictures and Hallmarks thread:
http://castboolits.gunloads.com/show...-and-hallmarks
About the only thing that will possibly work is CFE pistol and only with pistol gas. 1800 fps which is probably too fast for plain base. If 1:7 twist, that is another problem.
Whatever!
Do have the Pistol Gas System and 1-9 twist. Could also put a plain base check on them.
Last edited by brstevns; 11-15-2021 at 04:42 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |