Yes, should fit. You will need the longer bolt and washer for the traditional style stock.
How does it kick with that thing you have on it?
Full power or subsonic are both like shooting a 20 gauge birdshot load. The suppressor is a Lane Scorpion 458 titanium, takes about 40% of the recoil away
The H&R that I built a new buttstock for used a 3/8-24 thread for the stock bolt. My drilling wasn't quite centered, so I used a piece of all thread and a lock nut to give a bit more strength through the wrist.
Robert
I hope to get wood stock , I don’t really like plastic on a rifle.
Look for a Pardner single shot shotgun to swap stocks with. The barrel channel might need work but maybe not. Then cut the shotgun barrel to 18.5 inches and have a tacticool shotgun!
Sent from my SM-A716U using Tapatalk
Do the sb1 and sb2 receivers use the same stock bolt? I may have found a replacement but it doesn’t have a bolt.
Thanks
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |