Where do I get the powder
For coating the bullets. Been
Watching elvisammo and think I will
Give it a try as soon as I get my over..thanks
Where do I get the powder
For coating the bullets. Been
Watching elvisammo and think I will
Give it a try as soon as I get my over..thanks
keep on rolling along.no matter what happens just keep rolling
Eastwood for the Ford light blue, and I've used powder by the pound and prismatic powders with good results, but I recommend starting with Eastwood since it's a really great, easy powder to use. After that if you want to experiment with other colors, you can, because not all powders will work well
Sent from my SM-G996U using Tapatalk
I use smoke’s powder. He is one of us, and is always there to answer any questions you may have. Also, his powder works great. Go to vendor sellers smoke’s corner. Good prices, fast shipping, professional advice, I have never felt the need to shop around.
Due to the price of primers, warning shots will no longer be given!
the Coatings and Alternatives subforum a few clicks below this one has way more info than elvis ammo. Smokes is a board sponser and MANY of us use his offerings. look in the swap n sell for his add/products.
“Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem.” Ronald Reagan
Go here. Good guy. Tested powders.
https://castboolits.gunloads.com/sho...owder-For-sale
PS don't follow Elvis' advice on everything. Read this instead.
https://www.mp-molds.com/tipstricks/...ble-dt-method/
You do know there is an entire section in here on powder coating.
https://castboolits.gunloads.com/for...d-Alternatives
I will give another thumbs up to the powders that Smoke4320 sells right here on this site.
I've used his Jet Black, Signal Blue, White Aluminum, Traffice Purple, Yellow Green, and Traffic Yellow. All but the latter coat well by dry tumbling. And the latter coats functionally but is not as aesthetically colored as the others. Sometimes mixing them makes them coat even better.
"There is nothing like looking, if you want to find something."
~Thorin Oakenshield
Don't know which is better, smoke's powder or the amount of knowledge he brings to the table.
Huge plus having smoke on this sight & the ability to ask him questions.
Been using smoke's powder since he started selling it on this website & follow a lot of his posts picking up on bits of info here and there to this day.
Don't trust info given on youtube by ellvis......or any other clown on there.
Trust this forum for the latest and greatest info
Cure at 400F every time!
Smoke's powders are the best. He is one of us and tests everything out before he offers it for sale. It will work great for you!
Eliminate one the many variables of PC'ing and get a good powder proven to work an follow the curing instructions to a tee.
banger
I've used Powder by the Pound, Powder 365, and Prismatic Powders . Had good luck with all three, I think the color and type of powder you pick, along with your technic go a long ways towards success. MHO
Keep your powder dry and watch your six !!
Smoke's powder!
Maker of Silver Boolits for Werewolf hunting
Amen ... I'll second that ... I watched a Horror Show reloading expert and he was wrong on so many levels . Say's he's loading with black powder ... the powder's color was black ... but the can had Bullseye on the lable ... a full case of black bullseye powder will take a old 38 S&W top break apart ...
and this fool blames the GUN !
Just Don't Go There ...Please !!!
Smoke is a member and maybe a Vendor ...look for his powders , good people .
Gary
Certified Cajun
Proud Member of The Basket of Deplorables
" Let's Go Brandon !"
Agree with the advice given so far. I have a pile of Smoke's powders and also use Prismatic Powders. In my experience I find the more glossy the powder, the better the coating. I also mix some clear in every color I use as I'm not bothered by a mottled color and the clear helps with a good single coat.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |