Ok here are some items I made. I still have some more around here somewhere. Been doing this for a few years and have built tools as I needed them.
Ok Lets see if this works. Not sure why the pics turn on their side? Maybe a default on the camera. Ok figured it out, always take pic with phone in Horz position. Sorry.
#1 Shot shell holder for reloading empty cardboard boxes
#4 Expanding bushing/powder bushing for 44 mag die
#5 and #6 Push through sizing dies
#7 Decapper.
#8 Holding block for my lee magnifier lens
#10 Primer pocket de-crimping tool
#11 Tension brace for balancing spring on my powder dispenser
#12 Vise in vise mounting set up
#13 and #14 European shot shell swage for loose or EU primers.
#15 Grip block for roll crimping shot shells
#16 12 ga roll crimp gripper for 12 ga shorty shells
#17 12 ga hull trimmer
#18 Luber-sizer dies with inserts
#19 Trim sizers for shorty's Roll crimp stoppers
#20 Plastic square washers for Lee turret press
#21 Gun vise all wood.
#22 complete 410 shotgun loading kit.
#23 portable vise set up