Most of the Vintage SxS events I’ve attended have an event for pumps as well . Ones even starting a pre 1950 autoloader event . So a few months back we had a late 1930’s Winchester Model 12 16 gauge with a 30” full choke barrel at a somewhat reasonable price . The gun however was blueing free and the wood needed some care . So two weeks ago I pulled it apart , took the wood home and cleaned all the old varnish off with lacquer thinner , let it dry and started applying rubbed in Tung Oil . Put about twenty coats on and then brought the wood back to the shop after the gun was reblued . Also put a new original buttplate back on the stock the one that came with the gun had the toe chipped off . Need to work with it some more to get it slicked/smoothed up better to suit me . But I’m pretty satisfied with the new overall finish job .