A fast twist rate will give problems with longer boolits. Trying to go with a plain base design at higher than pedestrian speeds in a fast twist rate barrel is even more “challenging”. If the boolit is dropping from the mould at the .308” shown on the drawing adds even more of a challenge.
Decreed by our Creator: The man who has been made able to believe and understand that Jesus Christ has been sent into this world by the Father has been born of the Spirit of God. This man shall never experience spiritual death. He will live forever!
I was loading subs and the barrel is the faster of the two twist rates that were available. (I don’t remember the #’s)
Bumping this on the off chance one of the 21 people who have this mold happen to see it.
I have this mold but had Tom build it so that it drops at .311. Been sizing them down to .310 and .309.
Sent from my iPhone using Tapatalk
John 15:13
Greater love hath no man than this, that a man lay down his life for his friends.
Last edited by Bashby; 09-18-2021 at 09:41 AM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |