That depends what alloy you casted them with. If you used 20:1, or that 50/50+2%, or similar, then yes, the shallow hollow point (big cup point) will expand some, and likely pass through. I have no idea what the penta point will do. The big hollow point will probably really flatten out more than you want, that looks like a really big hollow point. Probably very good in 38 special.
13.5 gr should be a good starting point with H110, 16 gr should be a good max, and I really doubt you will get sticky extraction. I've run over that myself. No need to worry about speeds, just use what is most accurate in that range. I seem to recall 15 grains shooting very good with another bullet.