on mine, i just keep on punching them out and they pop out the top. Not too different from using a push thru sizer for bullets
on mine, i just keep on punching them out and they pop out the top. Not too different from using a push thru sizer for bullets
That's What I thought it should be having made a few dies like that. I used a hose clamp on the ram so I didn't lower it too far and have the punch come out of the die body.You don't want to keep crashing the two together and dull the cutting edge.
n.h.schmidt
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |