So I love so much heavy weight boolits in all calibers! So when I learned of the 200gr Super Police load I had to have the mold! It makes nice boolits but it absolutely will not drop the boolits! I have to tap on the handles of the mold for a solid 1 minute or longer before it will drop them. I Q-tip swabbed the mold with 2 stroke oil and it dropped 2 boolits nicely and then went back to them sticking. The mold was nice and hot so that was not it. It takes so long to drop that the mold cools off and at one point started making wrinkled boolits. Can't figure this one out...
I could seat the boolit a little deeper but this is just a dummy round anyways. Need to look up some loads for it in both 38spl brass and 357 Mag brass.