That fella in the video must not have known you can dump the ingot molds in about a miniute and reused them...like a bullet mold...if you want a 1,000 boolits, you don't need 1,000 cavities! A nice little unit.
That fella in the video must not have known you can dump the ingot molds in about a miniute and reused them...like a bullet mold...if you want a 1,000 boolits, you don't need 1,000 cavities! A nice little unit.
Take a kid to the range, you'll both be glad you did.
that feller right there has a near fortune tied up just in ingot molds. But it gives us an indication of volume/capacity, 16 molds X 4 pounds = 64 pounds in 5 minutes. Pretty nice.
I'd surely like to see what type valve or mechanism is used.
Correction: the video was/is the builder of the pots and he explains his demonstration in a reply to a question in the comments. He used the Lee 1 and 1/2 pound combination ingot molds. So he poured 45 pounds.
Last edited by oley55; 08-31-2021 at 02:05 PM.
“Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem.” Ronald Reagan
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |