I use 444 marlin cases for what they were designed for, my 444 marlin
I use 444 marlin cases for what they were designed for, my 444 marlin
243 winchester rimmed
Using them for years for 410 shottie. they make wonderful little shotshells that with moderate care last a very longtime. Not on topic but 9.3x74R work great for 3 inch shells
I use them for my 309 358 375 411 jdj wildcats in T/C contender. Simple, just run them into dies to reduce necks no trimming Rem brass serves me best
Funny you should ask, I have several 308 chambered barrels and was going to thread one for my Large Martini and make a 307 and use 444 shells to form brass for it as no 307 is available down under. regards Stephen
Rimmed 8mm Mauser with a .318 bullet soft point bullet for my Krieghoff drilling
https://www.sellier-bellot.cz/en/pro...sp/detail/128/
If you ever come North from South Texas, let me know and we will take it to the range
Mike
NRA Benefactor 2004 USAF RET 1971-95
Just like tdoor4570 I also use mine as 444 marlin, in my double rifle in 444 marlin
i have two .444 marlin rifles and one rifle in .375 JDJ, so .444 cases get double duty.
Skeet’s,
That link is the 8x57JR. That is a .318 bullet.
8x57 IRS/JRS is .323 bullets.
They are not interchangeable. Too much pressure for the S version in a non S
Do any of you get split necks? I want to play with a couple about two inches long.
Jim,
What are you trying to do? I don’t have any 444. I might have some odd 7x57 or 8x57 rimmed.
have 2 444 Marlin levers and a Win Timber Carbine. Also a 375 JDJ Encore.
Don
375 and 358 JDJ. Given the performance of both, with whichever bullets, I would never go back to the 375. Shooting a 14" SSK conversion of a factory T/C barrel.
Let's go Brandon!
Thanks Robert. We will meet up somehow not far apart.
For those wondering I have my great grandmothers smooth bore that I would like to make a couple rounds for it. Not sure on the exact chamber, may need to cast it. I think it is a .44xl. I'll do more research once it cools down. This 110+ heat index has be only working mornings.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |