Does anyone know the number of the correct RCBS or Lyman top punch for the Lee .358-200-RF bullet? I've found lots of data for RCBS and Lyman top punches to Lee bullets, but none for .358-200-RF bullet...
Does anyone know the number of the correct RCBS or Lyman top punch for the Lee .358-200-RF bullet? I've found lots of data for RCBS and Lyman top punches to Lee bullets, but none for .358-200-RF bullet...
Mine aren't boolet specific; they are bored out to 0.375 " diameter and contact the boolet at the shoulder, no matter what design l have at hand. Same for my seaters; They always seat or size straight. Didn't answer your question but is handy. Good luck
That sounds great, what brand and where can I buy one?
That Lee bullet is a copy of the RCBS 35-200-FN I believe, and per RCBS it is a #565 top punch.
$12 at Midway...
Sent from my iPhone using Tapatalk
Use a flat punch .
Take any of the punches that the cavity doesn't fit and fill the cavity with J-B Weld Epoxy , let set , sand flat and ... Voila'... (Wah-Lah) ... you have a punch that can seat any boolit with a flat spot on it !
Gary
Certified Cajun
Proud Member of The Basket of Deplorables
" Let's Go Brandon !"
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |